How to Fix General PC Error PC137 (No Display)
📑 In This Guide
Is your General PC PC showing error PC137? You are not alone. The error code PC137 indicates no display, and it affects thousands of General PC users worldwide. The good news is that this error is usually fixable at home without calling a technician.
In this comprehensive guide, we will walk you through 4 proven methods to fix General PC error PC137. We have organized these fixes from the simplest to the most advanced, so you can start with the easiest solution first. Most users can resolve this error in under 11 minutes.
What Is General PC Error PC137?
Error PC137 is a common General PC system error that indicates no display. This error can appear on your system's control panel display or as a pop-up message on your computer screen.
When error PC137 occurs, your system may stop working, flash warning lights, or display the error code. The root cause is typically related to dust buildup. Understanding what triggers this error is the first step toward fixing it.
Error PC137 can affect various General PC PC models, both older and newer versions. If you are experiencing this error, do not worry — we have compiled all the necessary troubleshooting steps below to help you get your system back to正常工作.
Common Causes of PC137
This error can be triggered by several factors. Understanding the root cause helps you choose the right fix.
- Dust buildup.
- Incompatible hardware.
System Models Affected by PC137
PC137 has been reported on the following General PC system models:
| Device Series | Models | Common? | Easy Fix? |
|---|---|---|---|
| PC/Laptop | All brands | ✅ Yes | ⚠️ Varies |
Error PC137 on any desktop or laptop PC.
4 Proven Ways to Fix PC137
Try these methods in order. Start with the easiest and most common solutions first.
Method 1: Check Connections
Easy ⏱ 5 min-
1. Power off.
2. Open case.
3. Reseat cables and RAM.
4. Restart.
Method 2: Run Diagnostics
Medium ⏱ 15 min-
1. Enter BIOS (F2/Del).
2. Run built-in diagnostic.
3. Note error codes.
Method 3: Test Components
Medium ⏱ 30 min-
1. Remove non-essentials.
2. Test minimum config.
3. Add parts one by one.
Method 4: Clear CMOS
Medium ⏱ 10 min-
1. Power off.
2. Remove CMOS battery.
3. Wait 5 min.
4. Reinstall and boot.
If you have tried all methods above and error PC137 persists, contact General PC support. They can run advanced diagnostics and arrange a repair if needed.
Frequently Asked Questions (FAQs)
Error PC137 on General PC systems indicates no display. This means the system has detected an issue that prevents normal operation.
Follow the step-by-step methods in this guide. Start with a power cycle, then check the no display, and proceed with the remaining fixes in order.
Yes, most General PC error PC137 cases can be resolved at home using the methods in this guide. Professional help is rarely needed.
If the fix is software or connection related, it is free. If a replacement part is needed, costs vary from $15 for cartridges to $150 for hardware repairs.
Hardware defects causing error PC137 are typically covered under General PC's standard warranty. Consumables like ink and toner are not covered.
Conclusion
General PC error PC137 can be frustrating, but as you have seen, there are 4 effective ways to resolve it. In most cases, starting with a simple power cycle or checking your cartridges will solve the problem quickly.
If you have tried all the methods above and the error PC137 persists, it may be time to contact General PC support for professional assistance. Remember to keep your system's firmware updated and use genuine supplies to prevent future errors.
Remember: power cycle first, check connections second, and update firmware third. Error PC137 can be resolved step by step.